Car Mats

Logo Floor Mats

Entrance Mats - Interior

Entrance Mats - Exterior

Waterhog Floor Mats

Anti-Fatigue Mats - Dry

Anti-Fatigue Mats - Wet

Anti-Static Mats

Static Accessories

Runners & Roll Goods

Conductive Mats

Speciality Entrance Systems

Heavy Industrial

Sports & Fitness Matting

Specialty Mats

Animal Matting

Cleanroom Mats

Home, Garage & Patio

Chair Mats

Gift Certificates

Trade Shows

Private Label / Charitable Mats

12' Wrist Strap Assembly # AA12 One size fits all Continuous conductive fiber with and integral one mega ohm resister Washable Meets EOS/ESD S1

---

15' Common Point Grounding Cord # AA20 Dual wrist strap jack with a molded-in male snap fastener. Integral one mega ohm resister on one end and a solder less terminal on the other. Solder less terminal is designed to be connected directly to an electrical outlet. This prevents the cord from becoming disconnected Meets EOS/ESD S1 A necessity for all Anti-Static Work Surface mats. We recommend the use of at least one (1) grounding cord for every 25 - 35 sqft. of mat

---

10' Universal Grounding Cord # AA22 One piece molded-in male snap fastener. Integral one mega ohm resister on one end and a solder-less terminal on the other. Solder less terminal is designed to be connected directly to a properly grounded electrical outlet. This prevents the cord from becoming disconnected Meets EOS/ESD S1 This cord does not have a personal grounding point A necessity for all Anti-Static Work Surface mats. We recommend the use of at least one (1) grounding cord for every 25 - 35 sqft. of mat

---

15' Grounding Cord # AA25 Straight cord with a dome shape cap and molded-in male snap fastener. Integral one mega ohm resister on one end and a solder less terminal on the other. Solder less terminal is designed to be connected directly to an electrical outlet. This prevents the cord from becoming disconnected Meets EOS/ESD S1 A necessity for all Anti-Static and Conductive floor mats. We recommend the use of at least one (1) grounding cord for every 25 - 35 sqft. of mat

---

Common Point Grounding Block # AA30 Provides for two grounding points Fits neatly under bench top - does not use valuable work surface space Can be permanently installed to workbench

---

Heel Ground # AA52 For use on conductive/dissipative floors or mats Optional built-in one mega ohm resistor Interchangeable grounding mechanism Fits most shoe sizes Meets EOS/ESD S1

---

Toe Ground # AA54 For use on conductive/dissipative floors or mats Optional built-in one mega ohm resistor Interchangeable grounding mechanism Fits most shoe sizes Meets EOS/ESD S1

---

Anti-Static Mat Cleaner # AA60 Cleans and provides static protection Non-corrosive...Safe on plastics Not just for mats...Use anywhere in your ESD environment 24oz. bottle with trigger spray nozzle

---

Universal Snap Kit # AA70 Can be installed with only a philips screwdriver One 10mm female snap One 10mm male snap One threaded base Two Philips head screws One washer Click Here for Directions on installing the Universal Snap Kit